Efficient machining of titanium

Horn is optimising its DS milling system to enable productive, cost-effective machining of titanium and titanium alloys. The optimisations are made possible by the newly developed substrate IG3I. By combining the novel carbide grade with a newcoating, the tool specialist has been... Read more

DTM milling system for brilliant-finish machining

Horn is expanding the DTM face milling system with inserts for brilliant-finish machining of non-ferrous metals and plastics. The DTS type inserts, which are tipped with monocrystalline diamond (MCD), make it possible to mill virtually perfect surfaces and achieve flatness of less than... Read more

Horn Group expands internationally

On 1st April 2020, Horn Group established a company in Turkey. It has taken over sales of the precision tool manufacturer's products in the Republic, a service that was previously provided by a trading partner. Horn took the decision to establish direct representation in Turkey so that... Read more

S224 face grooving system

Paul Horn GmbH in Tübingen has expanded its range of face grooving products. To accommodate axial grooving operations with diameters ranging from 38 mm to 1,000 mm (1.496" to 39.370"), Horn is now offering new holder variants for the S224 grooving system. The tool manufacturer is... Read more

Grooving System 32T

Paul Horn GmbH has developed the new 32T system for use on Swiss-type lathes and for grooving and parting off on smaller fixed-head lathes. The tool manufacturer is expanding the tool system by introducing versions for threading, grooving and longitudinal turning as well as for full... Read more

Tangential milling system 409

Paul Horn GmbH has extended the 409 tangential milling cutter system to include a precision-sintered indexable insert. The sintered insert with roughing geometry offers a cost-effective alternative to the ground version. The geometry includes a circumferential protective chamfer to... Read more

The 304 circular milling system

Paul Horn GmbH has extended its range of products for circular interpolation milling to enable the productive machining of holes with diameters of 8 mm (0.315")or more. With its triple-edged 304 milling system, the tool manufacturer is offering a versatile solution for groove... Read more

Targeted chipbreaking

Paul Horn GmbH has extended the 108 and 114 Mini systems by adding a new GM threading geometry that is suitable for turning ISO metric internal threads in partial and full profile. The chipbreaker geometry enables the production of short chips, even with long-chipping materials and... Read more

Boehlerit expands 3D milling system

Paul Horn GmbH presents the Boehlerit 3D milling system expansion for the tool and mould making industry. The ISO 00P, RHOMBItec, BALLtec and TORROtec systems cover all relevant machining operations for the 3D milling market segment. The ISO 00P is a universal tool system for... Read more

Milling system 406 with wiper geometry

Paul Horn GmbH has extended the 406 tangential milling cutter system to include an insert with wiper geometry for finishing. The new insert has been developed in response to demand from Horn’s customers, reflecting the fact that surface quality requirements are constantly ... Read more

Page 1 of 2.