Press Releases

Press Releases

Review EMO 2019 Hannover Boehlerit Milling System

Publication date: 11/26/2019

File size: 28,6 MB

Review EMO 2019 Hannover

Publication date: 11/04/2019

 File size: 46 MB

Preliminary Reports EMO 2019 Hannover

Publication date: 08/01/2019
  • File size: 22 MB


Publication date: 07/02/2019
  • File size: 22 MB

Technology Days Press kit

Publication date: 05/29/2019
  • File size: 189 MB

Horn on course for the future

Publication date: 01/30/2017

Tubingen based Paul Horn GmbH ended 2016 by moving into two new buildings fro production and administration.

The move doubles the precision tool manufacturers capacity.

It is clear the commitment to both the City of Tubingen and to production in Germany.

The total amount invested in the two buildings including production facilities amounts to more than 70 million euros.

Managing Director Mr Lothar Horn has said "We are investing in our future. It will be especially beneficial for our customers as we continue to focus on speed of response to orders, top quality and precision.

Supermini and Mini with Diamond cutting edges

Publication date: 01/30/2017

Diamond-tipped Supermini and Mini Tools are an addition to the product range that Horn Cutting Tools offers for Machining bores.

The tools are used for Boring, Profiling and Grooving when working with aluminium, Sintered Carbide, Ceramics or Plastics.

They are also used for machining non-ferrous materials which are either highly abrasive due to their silicon content or have a tendency to exhibit chipping problem and form built-up edges.

The chip breaker geometry which has been specially developed for this purpose solves virtually all machining problems caused by uncontrolled stringy swarf.



Micro Endmills for mirror-finish machining

Publication date: 01/30/2017

Horn is expanding its Milling cutter range fro ultra-precision machining.

A new addition to the range are micro endmills with monocrystalline diamond (MCD)

The extremely sharp and flawlessly polished cutting edges produce surface qualities of up to R, 0.02mm.

The quality of the cutting edge perfectly reflects the surface finish that can be achieved.

Press information AMB 2016

Publication date: 09/19/2016

New Press release AMB 2016 




File size: 93 MB

Source: Paul Horn GmbH

Horn thread milling maximises productivity for DW Engineering

Publication date: 09/01/2016

Introduction of DCG three tooth thread milling tooling supplied by Horn Cutting Tools Ltd. Ringwood, has significantly improved production efficiency for DW Engineering Ltd of Burnbank, Hamilton. DW is a machining subcontractor specialising in high precision components produced in a diverse range of materials for a wide range of industry sectors....

Horn GmbH apprentices put in sharp performance in 2015 New Milton pedal car GP

Publication date: 07/12/2015

A team of apprentices, who are currently being trained in engineering skills at Paul Horn GmbH's German headquarters, came close to a podium finish in the 'Hoburne New Milton Pedal Car Grand Prix' when it crossed the line 4th in a field of 46 finishers on Sunday 12th July.

Horn Cutting Tools Ltd

Horn M101 System Cut Above the Competition at SRD Engineering

Publication date: 07/01/2015

By utilising Horn Type M101 disc milling cutters, precision engineer SRD Engineering Ltd has gained extreme improvement in part-off/cut-off operations, reducing overall cycle times by around 10 minutes per component.

Horn Cutting Tools Ltd

HORN Thread Milling Taps into Productivity and Quality on Large Diameter Threads

Publication date: 03/11/2009

HORN thread milling taps into productivity and quality on large diameter threads. Thread milling tooling supplied by Horn UK has provided TM Specialist Engineers Ltd., Kingswinford, with a high productivity method for machining large diameter threads in carbon steel.

Horn Cutting Tools Ltd

Horn Broaching System Makes the Big Time on Forgemasters Broaching Task

Publication date: 03/10/2009

HORN Broaching System makes the big time on Forgemasters broaching task By using the Horn broaching system, engineers at Sheffield Forgemasters International Ltd., have been able to reduce the time needed to broach single 28 mm wide key-way slot by nearly 24 hours.

Horn Cutting Tools Ltd

HORN GmbH Doubles Size of Factory

Publication date: 03/09/2009

Major expansion of the manufacturing facilities at Paul Horn GmbH in Tubingen, Germany has recently been completed.

Horn Cutting Tools Ltd

HORN Tooling Gives Double M Engineering the Edge

Publication date: 03/06/2009

HORN Tooling gives Double M Engineering the edge where it matters. Application of a variety of turning and milling tooling supplied by Horn UK has played an important role in the success enjoyed by contract manufacturer Double M Engineering Ltd.

Horn Cutting Tools Ltd

HORN Develops Laser-Machined Chipbreakers

Publication date: 03/05/2009

HORN DEVELOPS LASER-MACHINED CHIPBREAKERS Engineers working at Paul Horn GmbH in Germany have developed a technique for profiling chip breaker geometries into polycrystalline diamond (PCD), using multi-axis laser machining. The method has also been applied to carbide cutting inserts.

Horn Cutting Tools Ltd.

HORN Supermini® Chip-Breaker Beats the 1000 Insert Barrier

Publication date: 03/04/2009

Latest addition to the Horn Supermini® range, now available from Horn Cutting Tools Ltd., Ringwood, is a Type 105 insert that offers significantly higher productivity when machining in bore diameters of 4 mm or greater.

Horn Cutting Tools Ltd

Customised Tooling Reduces Costs and Improves Performance at Denso Manufacturing, Telford

Publication date: 03/03/2009

DENSO Productivity gets in the Groove with HORN Upgrade.

Switching from custom-ground high speed steel grooving, part-off and chamfering tooling to a Horn ‘Standard Plus’ carbide insert based tooling package has allowed Denso Manufacturing UK Ltd, Telford, to achieve major cost savings on volume produced precision tube components.

Horn Cutting Tools Ltd.